Guardian Warrior Solutions Adapt Series Added to Attachment Options

We've had some requests to add the Guardian Warrior Solutions Adapt mounting attachments to our attachment options - and they're live now!

.

The Adapt series is made out of Curv, an advanced material similar to Tegris (which is what the Adapt attachments were made out of previously).  We're stocking the Adapt 1 and Adapt 2 - pictured below.

.

Assembling the Adapt 1 and Adapt 2 are similar to assembling the Molle-Loks or Tek-Lok onto ZERO9 Gear with the added step of screwing the assembly to itself once you have it mounted on your vest.

.

The Adapt 1 and Adapt 2 are available HERE in the Additional Hardware and Attachments listing. Select the Adapt 1 for any ZERO9 Gear with 1 row of mounting holes (OC, Baton, Flashlight etc) and the Adapt 2 for any ZERO9 Gear with 2 rows of mounting holes (Cuffs, Radios, most BodyCam Cases etc).

.

We recommend researching the Adapt lineup HERE on GWS' YouTube channel.  These are an advanced attachment method that hold your gear closer to the vest than Molle-Loks can but the assembly and mounting is slightly more involved than the other attachments so doing some research ahead of purchase will go a long way in determining whether these are right for you and your application.

.

These will not come off quickly once they are screwed onto your vest so keep that in mind when making your selection.

.

  

.

These are only available as a separate mounting solution - they will not be available to swap into an order or select as the attachment on a case.

These will work with molle belts and other gear with molle channel (backpacks etc) - your mileage may vary with using these on belts that are less than 3" high (standard molle channel).  GWS makes short and micro options for shorter molle applications such as these belts (not stocked at ZERO9).