Admin Combo Kit Instructions

Zero9 Admin Combo Kits!

If you have the need for 2 pieces of gear combined on one attachment for your belt (admin, detective, off duty etc) - these will be your new go to.  These have been around for decades in leather and even Fobus plastic - but you need to upgrade!  Keep reading for information on how to order and how to make your own combo kit!

These are fully modular and ambidextrous so you can choose what side you want to carry the kit on and what pieces of gear you want to carry.

We have listed a handful of the most common combinations as pre-built combos HERE - but you can also buy the adapter plate with your choice of belt attachment and add 2 other items to your order and attach them on your end if you have a specific set of gear you want to carry (flashlight, glove case etc).

We recommend a "large" case to the rear and a "small" case on the front of the adapter plate (ie Cuffs to the rear and pistol mag to the front).  Large cases would be anything with 2 rows of mounting holes and small cases would be anything with 1 row of mounting holes.  These will technically work with any of our gear but keep in mind what belt mount you are going to use as something as heavy as a portable radio may not work as well with a quick clip as it would with a tek-lok.

*** ORDER YOUR ZERO9 ADMIN COMBO KIT HERE ***

INSTRUCTIONS TO MOUNT YOUR GEAR TO AN ADAPTER PLATE:

Follow the instructions on the pictures below to take 2 pieces of Zero9 Gear and mount them to your adapter plate.  You will use the hardware included with the 2 pieces of gear (choose a backup attachment method when ordering, remove the molle-lok or tek-lok from the gear and use the mounting hardware to mount your gear to the adapter plate).  Always make sure to check all your gear periodically and re-apply thread locker as needed!