The newest versions of the Pepperball Blasts are shipping with a black cap/cover over the red actuator (pictured below). If you have this cover - you need to order the V2 Blast case available HERE.
If you do NOT have the black cover (only a red button) - you have the original Blast and will need our Blast case.
Both the original Blast Case and the V2 Blast Case are available HERE now.
Pepperball Blast (Original) Pepperball Blast V2
]]>We put together a set of videos to address some of our most frequently asked questions. Everything from flashlight fitment, OC sizing, how to open, close and mount the various attachments we offer and making adjustments to our gear. Check out these videos to get more information on Zero9 Gear!
]]>
Send us your agency patch to the address below with your contact information (Name and email address at a minimum) and we'll send you one of our patches and enter you to win your choice of 3 pieces of Zero9 Duty Gear!
Deadline for entry is December 10th - we'll randomly select a winner and post the results on our social media.
]]>Zero9 Holsters
49300 Cooper Foster Park
Amherst, Ohio 44001
We have gotten several requests over the years for the ability to have our gear rotate on a belt or vest (think multiple cant angles on your baton, Taser or portable radio). We have also gotten several requests over the years for a quick disconnect option to move gear from a belt to a vest or from one vest to another without removing the molle-loks.
Blade Tech has released a solution that handles both of these requests in one package - and now you can get them right here to mount your Zero9 gear with multiple new options.
The Tek-Mount (Large) and the Tek-Mount (MINI) are now available HERE as an ADD-ON to your order. These will come with hardware to mount your existing Tek-Lok or Molle-Loks to the Tek-Mount (they are not included with the Tek-Mount).
Once you have the Tek-Mount attached to your existing Tek-Lok or Molle-Lok(s) you can mount the receiver to your belt, vest or other platform and mount the disk to your Zero9 case using the included hardware. From there you have multiple cant angle options and the ability to quickly detach your gear from one platform and move it to another.
Pre-stage as many receivers as you have platforms (vests, belts, backpacks etc) and use a single disk on your Zero9 case to move it from receiver to receiver as needed.
Check out the links below to get information on mounting the Tek-Mounts to your equipment.
Click HERE for Tek-Mount (Large) Info
Click HERE for Tek-Mount (MINI) Info
Click HERE for Mounting your Tek-Lok to Gear
Click HERE for Mounting your Molle-Lok to Gear
]]>
Utility/Bodyworn has several different cell phones in use with their camera systems currently. We have cases for most if not all of them although they tend to add new cell phones quite often. The pictures below should help you make a decision on which case you need. Match your cell phone to the picture and the text on the picture will direct you to the correct case. The listing for the Bodyworn System Cases is HERE.
Bodyworn Case #1 - This is the oldest cell phone system in use currently - it often goes by the name Motorola G7 although we're told they are also sold under different model numbers so check the camera placement on the back to match it to this pic:
Bodyworn Case #2 - This case covers 2 or 3 models (2 are pictured here) - the key to this case is that the camera on the back is on the left side as you look at the back of the phone. The cell phones for this case are often referred to as the Motorola ONE and the Motorola G Power (with the camera on the left). The cameras may be in different configurations/shapes but the case keys in on the magnet sleeve which Utility uses for both configurations:
Bodyworn Case #3 - This case fits what is often called the Motorola G Power - but with the camera in the center on the back of the phone.
Please email us ahead of ordering if you have any questions after comparing your system to these pics - Utility uses new cameras all the time and they may have shipped you a new system without saying anything. We've also seen them ship different cell phones to the same agency in the same batch so it is important to verify each phone to ensure the right case is ordered.
DON'T FORGET TO GRAB YOUR REMOTE CASE WHILE YOU'RE ORDERING!
If you want to keep the remote on your belt or vest instead of wearing it as a watch or wrapping it around a molle channel - our remote case is for you!
]]>You've asked for a while now and here they are - single mag cases to cover what you need. The Zero9 Single Mag Case is ambidextrous, compatible with most 9mm and 40cal double stack mags (Glock, Sig, S&W, FN, Walther) and mountable at multiple angles.
]]>You've asked for a while now and here they are - single mag cases to cover what you need. The Zero9 Single Mag Case is ambidextrous, compatible with most 9mm and 40cal double stack mags (Glock, Sig, S&W, FN, Walther) and mountable at multiple angles.
The Zero9 Single Mag Cases have adjustable retention via our adjustable retention device on the side - each case comes with the device and an adjustment key to dial in your preferred retention. The mag cases will work with the mag in either direction so you can get your beer can grip or a more traditional finger lead grip.
You can mount these to your vest (molle-lok) or duty belt (tek-lok) and they can be mounted at several angles to help with that speed draw.
The Zero9 Single Mag Case is designed with a finger cut on both sides to get a positive grip and a flared magwell to get the mag back in easily.
We know plainclothes and admin folks out there want a single mag/handuff case combo - these mag cases will allow you to mount one of the Zero9 Single Mag Cases next to a Zero9 Handcuff Case on your belt with ease. Then - when you no longer need the set of cuffs but want to keep the reload - you can take the cuff case off and retain the single mag without needing a second or third case to do so.
]]>
*** UPDATE 10/5/2023 ***
Shipments to Canada have degraded so completely at this time that we have turned off shipping to Canada altogether. We are getting feedback that Canada Post will "do an investigation" into your parcel after having been scanned as turned over to CP by USPS but refuse to acknowledge they received the package. We would love to continue sending gear to our Canadian customers but with the extremely low success rate currently it is not feasible. Make sure to check out the Dealer Locator linked below for our Canadian Dealers, we'll be adding more as we go and hope to have a better way to get deliveries through soon.
*** UPDATE - Canadian Dealers are being added to our DEALER LOCATOR - read on for further details ***
Transit times to Canada are significantly delayed right now for unknown reasons. We're shipping all orders between 2 days and 1 week from order date however it has been taking up to 4 months to arrive to the recipient in Canada.
We've tried sanitized generic packaging and labels and we've tried full on retail packaging announcing the products are law enforcement related but have not seen a measurable difference in transit times.
We're told by some customers who reached out to Canada Post that the Canadian Border Authority is holding packages at the border for "further review." We're not sure what triggers that but some folks have had success with calling Canada Post and asking that their package be moved along.
As with any package we send out, we do not have control over transit times. Tracking is showing that packages are reaching the border and being turned over to Canadian authorities within a week of being shipped. From there we're seeing delays of up to 4 months.
We're sitting at a 40% delivery rate for all Canadian packages shipped since February as of 4/23/2023. So far, all packages except 1 have been delivered since December.
All this being said, we are working with a distributor to sign up dealers in Canada to help alleviate this issue. If you know of a local uniform store, please stop in and ask them to contact us about being a dealer so we can start getting ZERO9 gear into stores in Canada to avoid these transit times.
]]>We've updated the Flashlight Case listing with the addition of our new version Bezel Up cases and to better reflect both the Bezel Up and Bezel Down variants available. You'll notice that the Modlite HOG case is coming soon!
The Bezel Up cases have transitioned to versions of our baton cases which offer adjustable retention through an included hex key that can make adjustments to the retention device embedded in the side of the case. The Bezel Up cases have 2 options for sizing, flashlights in the .8"-1" range (Strion, Tac-400 etc) work with our Bezel Up - 1 and larger handle diameter lights work with our Bezel Up - 2 case (Stinger, Poly Stinger etc). The new Stinger 2020 is also listed in this product and will hold the Stinger 2020 Bezel UP or DOWN. The original Stinger works with this case - only Bezel DOWN.
The Bezel Down cases are the same cases that were previously titled for the primary light they were designed to carry (Fury and Tac-400). They've been renamed to better represent the function as opposed to primary light. The Fury case is now the Bezel Down - 1 and the Tac-400 case is now the Bezel Down - 2.
BEZEL UP FLASHLIGHT CASES ARE AVAILABLE HERE
BEZEL DOWN FLASHLIGHT CASES ARE AVAILABLE HERE
]]>The ASP Sentry Cuff Cases are available here and ready to go in plain black and basketweave. Our standard 6 colors will be ready for these cases late March/early April. These cuff cases are only compatible with the new ASP Sentry Cuffs, no other brand/model is known to fit at this time.
We have had requests for several years for a way to fill the mounting holes on the front of our solid color cuff cases. The mounting holes are designed to allow for double cuff cases and the mounting of other Zero9 cases to the front of your cuff case (FOB cases, pistol mags etc). That being said, some folks don't want to see the mounting holes.
Our cuff case fillers are compatible with all of our cuff cases (ASP, ASP Sentry and Standard). They are completely cosmetic and non-functional and as such they are not warranted against loss or damage. We recommend a drop or two of super glue on the posts to make a better bond with the cuff case (you can also go to the extreme and use a dab of silicone adhesive between the cuff case and the filler). These fillers will withstand most abuse however they can be removed with a strong direct pry attack.
The Zero9 Cuff Case Fillers are available here.
]]>New unstructured trucker "dad" hats with awesome new leather patches
Nalgene style water bottles
Insulated tumblers - both laser marked and UV printed
More new T-shirts than we've had before
All ready to go and fulfilled by our partner in Texas so they'll ship separately from your duty gear order.
Now available on the website HERE - we have cases for the APXNEXT with the short/standard battery (cases we've been offering for a few months) and now cases for the APXNEXT with the Extended battery (tall battery) that ALSO work with the short/standard battery through the use of a shelf inserted in the case.
The shelf comes installed in the case for transit - if you have the tall battery - remove the shelf and hold onto it somewhere safe in case you ever need to use the case with the short battery.
If you have the short battery but plan on getting the tall battery at some point down the road - order the APXNEXT Case (Extended Battery) HERE and keep the shelf in the case until you get the tall battery.
The shelf can be removed by pinching the 2 side tabs at the bottom of the case and dropping the shelf out from the top. To reinsert the shelf - slide the shelf back into the case from the top and push down on it until the 2 side tabs click in place.
If you've lost your shelf and need a replacement - they are available in the additional hardware and attachment listing HERE.
If you have the APXNEXT XE (Bright yellow - typically used by the fire services) please note your order to that effect and send us an email with your order number and the model you have so we can modify the case for the extended side buttons).
]]>
These cases will fit all 4 RCB baton lengths but is designed to work best with the 24" and 26" batons. The 21" will fit but sit lower in the case and the 29" will fit but will have more grip extending out of the case.
The cases will be available with either a tek-lok (belts including duty belts) or a molle-lok (molle outer carriers). The tek-lok can be mounted at 0, 45 or 90 degrees but does NOT swivel or rotate.
As with all of our pre-orders, any order containing a pre-order item (ie these RCB baton cases) will ship complete once the baton cases are ready to go out. No partial shipments at this time.
RCB baton cases are ESTIMATED to begin shipping the week of 10/24/2022.
RCB Baton cases are available at the link below:
https://zero9holsters.com/products/expandable-baton-case?variant=39910478741607
]]>
- If you have the original/standard battery on your Harris XL-200/XL-185 - select the XL-200/XL-185 Radio Case (Linked Here)
- If you have the extended battery on your Harris XL-200/XL-185 - select the XL-200/XL-185 with EXTENDED BATTERY Radio Case (Linked Here)
- If you have the LTE Module (See pic below) and either the standard or extended battery on your Harris XL-200/XL-185 - select the XL-200/XL-185 with LTE Module Radio Case (Linked Here)
The LTE Module is an accessory mounted on the top back of the portable radio which allows the radio to connect via cellular signal when there is no traditional radio tower coverage. The module is very specific and not something that you can miss on the radio (see pic below). The Florida Highway Patrol (FHP) and most if not all Florida State LE agencies have switched to the XL-200 with LTE Module and Extended Battery.
]]>Enhancements include:
See pics below for a look at the new cases. They are shipping now in plain black. Basketweave will still be the former generation case for a couple months and our 6 colors will ship as the former generation case until we can get the new cases run in those colors.
Click HERE to go to the APX6000 / APX7000 / APX8000 Portable Radio Cases
]]>
These cases are designed to carry 1 reload for the new Taser 7. They can be ordered with a molle-lok for molle vest, molle backpack etc, a tek-lok for belts (duty belts, trouser belts - pretty much any belts).
They can also be ordered with hardware only to mount them to your existing Zero9 Taser 7 case. For our older Taser 7 cases (only 2 holes on the long spine) you can put up to 2 cartridge cases on the front of the Taser case. If you have one of our newer Taser 7 cases (3 holes on the long spine) you can put the 2 cases on the front as well as 1 cartridge case on the long spine.
So these cases give you the flexibility to mount spare cartridges on go bags, outer carriers, belts and backpacks to have spare Taser 7 cartridges handy wherever you need them.
These come in black only and are only available for the Taser 7.
Find the spare cartridge cases HERE.
Find the Taser 7 (and other Taser cases) HERE.
]]>
These key fob cases are slimline and designed to keep your key fob on your vest or duty belt via a single Molle-Lok for quick access to lock and unlock your vehicle! The cases trap the fob so do not use it as your primary key if your fob has a fold out key (folks use them all the time as the secondary to lock/unlock).
Don't forget - Ford and Chevy/GMC use older FOBs as their interceptor/police version FOBs - so make sure to double check the picture to match what you have!
]]>
Ruggedized upgrades to hold your special munitions wherever you have some extra molle. Put a couple on your leg shroud, your vest, you buddy's vest, your go bag or your Team's munitions bag!
The Double 40MM Reload case features adjustable retention and 2 molle-loks to mount where you need it. Comes in Black, FDE, Coyote, Ranger Green, OD Green, Wolf Grey and Multicam.
The Single 40MM Reload Case features adjustable retention and a single molle-lok to mount where you need it. Take the molle-lok off and mount it to you Safariland leg shroud. The Single 40MM reload case comes in black only at this time.
The Standard Size Bang Case preotects the spoon and features a retention lanyard for an extra level of protection should you want it and a single molle-lok to mount it to molle channel. This case can also be mounted to your Safariland leg shroud by removing the molle-lok. The Standard Bang Case comes in Black, FDE, Coyote, Ranger Green, OD Green and Wolf Grey.
The Mini Bang Case protects the spoon and features a single moll-lok to mount to molle channel. This case can also be mounted to a Safariland leg shroud by removing the molle-lok. The mini bang case comes in Black, FDE, Coyote, Ranger Green, OD Green and Wolf Grey.
FIND ALL OF THESE CASES HERE!
]]>
"A while ago I found out that Streamlight released their Stinger 2020 Flashlight and I knew I wanted to upgrade my ten-year-old Stinger DS LED HL (which I'll be reviewing soon) because its rechargeable battery finally failed and started leaking, and as I've said before, rechargeable flashlights are the way of the future. Streamlight finally listened to their end-users, something which I have been repeatedly pointing out they are not been doing in the past. So I decided that I wanted to get the new Stinger 2020 because I have been using a Stinger flashlight on duty since I came on the job, originally was an incandescent Stinger, which they call the Stinger Classic now. The only missing piece to the puzzle was that I needed a good duty-grade holster as Streamlight didn't provide one and the one they do make really sucks. I knew that Zero9Holsters was going to be making one from their IG posts and I DM'd them seeing when they were going to have one coming out. I have been following since I purchased a police radio holster for duty and they also sent me a 3-magazine Glock pouch that I've used on and off. I asked if they would send me one of these Stinger 2020 holsters and they only had a prototype available, which is fine for initial impressions purposes."
Link to full review:
]]>
- Stinger 2020 - Bezel UP or DOWN!
- Stinger (DS, DS LED etc) - Bezel DOWN.
- Nightstick NSR-9924XL - Bezel DOWN.
- Stinger (DS, DS LED etc) - Bezel UP.
- Coast TX14R, TX9R - Bezel UP.
- 5.11 PC3.300 - Bezel UP.
- *** THE POLYSTINGER DOES NOT FIT THE STINGER BEZEL UP CASE
- Strion (LED etc) - Bezel UP.
- HL5X - Bezel UP only - bikini style.
- Nightstick TAC-400, TAC-500 series lights - Bezel DOWN.
- Surefire 6P, G2X, G2ZX Bezel DOWN.
*** COMING SOON ***
- PELICAN 7060
- SUREFIRE FURY AND COMPATIBLE LIGHTS
]]>
MOLLE-LOKS attach to all of our gear the same way that malice clips do and if you have one of our cases and want to upgrade to MOLLE-LOKS you can visit the additional hardware and attachment page to get either (1) or (2) MOLLE LOKS with hardware to up-convert your case now!
]]>
MOLLE-LOKS attach to all of our gear the same way that malice clips do and if you have one of our cases and want to upgrade to MOLLE-LOKS you can visit the additional hardware and attachment page to get either (1) or (2) MOLLE LOKS with hardware to up-convert your case now!
]]>
For unknown reasons Tactical Tailor, the manufacturer of the Malice Clip, has decided to stop production of the Gen 1 Malice Clip in favor of their Gen 2 "Fight Light" Malice Clip. We have used the Fight Light versions extensively in the past and know them to be an inferior product. In light of this, we have decided to go with another option.
The Molle-Lok, manufactured by Bladetech (the same company that makes the Tek-Lok's we use for our duty belt mounting option) is a superior product and the choice of many of our customers although we have not until this point offered them due to their cost. The Molle-Lok installs on our cases in the same method as the Malice Clips did and in fact offer a fourth mounting hole to extend the ride height options available.
With the end of the Malice Clip, we've made the decision to begin offering the Molle-Lok as our molle vest mounting option. We believe that this move will allow us to offer the best possible product at the best possible price even though the cost of our molle mounting option will need to increase.
The timing of the transition will be first quarter of 2021 although the exact date is still to be determined.
We greatly appreciate everyone's continuing support, be safe.
]]>Due to a material supply shortage/delay all orders that contain items with malice clips (molle mounting) will be delayed approximately 1 week.
]]>Due to a material supply shortage/delay all orders that contain items with malice clips (molle mounting) will be delayed approximately 1 week. We are working on new options for molle mounting that we hope will negate the future need to delay orders due to suppliers dropping the ball again. More info to follow in the coming weeks.
]]>
Quick ship items (see blog post for list) typically ship within 1-2 DAYS of order (sometimes the SAME DAY).
Made to order items in plain black or our 6 primary color offering typically ship within 2-5 days.
Basketweave made to order items may experience delays currently while we work out material supply issues.
]]>INSTRUCTIONS
1. Mount the DMP to the AR mag case by holding the threaded post (female) inside the DMP:
2. Using a thin barrel Phillips head screwdriver, insert the screw through the AR case into the DMP (repeat times 4):
3. Once all 4 screws are holding the 2 cases together, hold a threaded post inside the AR mag case facing out the back and place a screw through the tek-lok (or malice clip) to affix the attachment (repeat times 4):
]]>
- Mark 2 is the smallest size - by DIAMETER (1.375" ), not necessarily by height.
- Mark 3 and Mark 4 share 1.5" diameter but Mark 3 is shorter (height varies by brand).
- Some brands do NOT hold to industry standard sizing and may call their cans Mark 3 when they are ACTUALLY a Mark 2 so double check your can's diameter.
Mark 2 (1.375") : Mark 3 & Mark 4 (1.5") :
Known OC Can Case fit by brand:
Fox Labs - Mark 2 case
Aerko/Freeze +P and Punch II short cans - Mark 2 case
Sabre Red - matches Mark sizing - check diameter.
Aerko Freeze +P tall can - Mark 4 case
Def Tec - matches Mark sizing - check diameter.
CTS - matches Mark sizing - check diameter.
*** Email us at info@zero9holsters.com with questions on what case to order ***
]]>]]>
We just put the GLOCK 45cal double and triple mag cases live on the website. They are in stock for plain black currently and available for pre-sale in basketweave. As we get the parts in and assembled for the basketweave they will begin shipping.
]]>We just put the GLOCK 45cal double and triple mag cases live on the website. They are in stock for plain black currently and available for pre-sale in basketweave. As we get the parts in and assembled for the basketweave they will begin shipping.
These will subsequently be available for OTHER 45cal mags, we do NOT have a solid timeline yet but it will be a few weeks to get the measurements together and the insert parts into production to get them to market. We will definitely update as it gets closer.
Additional colors will be available consistent with our 6 primary color offerings in the future as well.
]]>
Each set of extra attachments come with the screws and threaded posts you'll need to install them.
Keep in mind - all of our gear shares the same hole pattern and that hole pattern is the same for malice clips and tek-loks so you can switch between them if you need to!
WE RECOMMEND APPLYING THREAD LOCKER TO ALL YOUR MACHINE SCREW THREADS. Machine screws have a tendency to vibrate loose over time, all of our attachment method screws (malice clips, tek-loks etc) are pre-treated with thread locker but anything that needs to be adjusted (retention screws on cuffs, double mags, triple mags etc) cannot be pre-treated or you'll negate the ability to adjust them when you get them. Once you've determined the level of retention you like, set the retention screws in that position with some thread locker (loc-tite, vibra-tite etc).
Please make sure to treat your machine screws and CHECK THEM PERIODICALLY to make sure the thread locker has not worn off. Reapply thread locker when needed and you'll be good to go! This goes for all machine screws so check all your other gear as well - often!
]]>
- Coyote
- FDE (Flat Dark Earth)
- OD Green (Olive Drab Green)
- Ranger Green
- Silver Tan (Desert Tan) ***SEE ADDITIONAL INFORMATION HERE ***
- Wolf Grey
We are still not going to be doing blue.... there are just too many shades to try and match all of them and none of the darker, navy style blues are available in kydex/boltaron which means the made to order line would not be available regardless of color matching the injection molded line. We firmly believe that all the navy blue (midnight navy, dark navy, LAPD navy etc) carriers on the market match very well with black cases. Please see our instagram feed and Molle Vest highlight for examples of navy blue vests with our black cases on them.
As always, thanks and be safe.
]]>